schurter, inc. ?phone 707-636-3000 ?fax 707-636-3033 ?e-mail info@schurterinc.com ?website http://www.schurter.com 27 selection chart for cord retainin g clam p select desired inlet and plug. match corresponding number to legend at right to identify retaining clamp order number. inlet plug 4300.0602 3 2 3 2 3 3 3 3313112213 2323 4300.0603 45 4300.0407 6 insulation cover for ac inlets, outlets and power entry modules series 6100 technical data: material: flexible plastic pvc surface resistance: 7.8 x 10 8 ? at 23 ? c, 63% humidity easily mountable from back side oxygen index rating: 30 (tested by cookson labs) based on the oxygen index rating, material qualifies for ul 94v-o ke kec keb (2-pole) keb (1-pole) kea series 6200 series 6600 kd kg accessories for ac inlets, plugs and power entry modules order numbers series order no. series order no. kea (except pcb mount type) 0859.0047 kg / cg with or without bowden cable 0859.0109 keb (1-pole) all part numbers 0859.0047 cd with or without bowden cable 0859.0077 keb (2-pole) all part numbers 0859.0075 ce all part numbers 0859.0108 kec / kfc all part numbers 0859.0072 series 6100 / 6102 / 6110 / 6120 0859.0048 kd with or without bowden cable 0859.0074 series 6200 / 6202 / 6220 / 6600 0859.0047 ke all part numbers 0859.0076 cord retaining clamp (to prevent loosening or accidental removal) 0888.0001 clamp with hexnuts drawing for 0888.0004/0005 only: clamp with hexnuts keb i / kfb i screw-on kea snap-in kea / kfa screw-on keb i snap-in keb ii / kfb ii kec / kfc kd / cd ke / ce kg / cg kfs / kfx felcom 54 / 64 5100 screw-on 5110 screw-on 5200 screw-on 5220 screw-on 6100 screw-on 6100 snap-in 6110 screw-on 6110 snap-in 6200 screw-on 6200 snap-in 6220 screw-on 6600 screw-on 6220 snap-in for filter type: nominal size +0.5mm dim. a order no. (mm) 1 0888.0001 38.0 2 0888.0004 39.0 3 0888.0005 41.0 4 0888.0015 45.5 5 0888.0016 48.0 6 0888.0017 43.0 new order no. 0888.0021
4781.0000 4781.0100 abab aaaaacab hcc b bc a c a ba b a 4782.0000 4782.0100 4732.0000 d e e e d e 4735.0000 f g g g 4795.0000 k 4796.0000 j ww w .schurter .com info@schurterinc.com 1 insulating cover the terminals of the schurter appliance plugs can be protected against unintentional contact by the use of an additional insulation cover. they are made of flexible thermoplastic (ul 94v-0), black and can be mounted easily from the rear with the corresponding appliance plugs. order no. suitable for 0859.0047 kea (without kea-print) keb i 6200, 6202, 6205, 6220 6600 0859.0048 6100, 6102 0859.0072 kec, kfc 0859.0074 kd 0859.0075 keb ii 0859.0076 ke 0859.0077 cd 0859.0108 ce 0859.0109 cg, kg cord retaining kits for protection against loosening or accidental removal of the plug connector. can also be mounted later. the correct kit type for each combination of fixed and free components is shown in the selection chart below. the corresponding order no. for each kit type is shown in the smaller chart. horizontal flanged components are secured to the panel using the kit supplied. vertical flanged or snap-in components require additional drilling for the cord retaining kit as shown in the diagrams below. each cord retaining kit consists of: 1 stainless steel retaining spring 2 nickel plated brass pillars 2 nickel plated brass nuts 2 nickel plated beryllium copper crinkle washers cut-aways or countersinks on pillars to face inwards. cord retaining kits selection chart kea snap-in kea / kfa screw-on keb i snap-in keb i / kfb i screw-on keb ii / kfb ii kec / kfc kd / cd ke /ce kg / cg kfs / kfx felcom / 54/64 4707 4721 screw-on 4723 snap-in 4752 4797 4798 4754 5100 screw-on 5110 screw-on 5200 screw-on 5220 screw-on 6100 screw-on 6100 snap-in 6110 screw-on 6110 snap-in 6200 screw-on 6200 snap-in 6220 screw-on 6220 snap-in 6600 screw-on 6600 snap-in appliance inlet or outlet plug or connector for cable 1) substitute for order nos. 0888.0001?888.0017 from schurter inc.; see conversion list page 2. order no. kit type 4700.0001 a 1) 4700.0002 b 1) 4700.0003 c 1) 4700.0004 d 1) 4700.0005 e 1) 4700.0006 f 4700.0007 g 4700.0008 h 4700.0009 j 4700.0010 k appliance connectors accessories
ww w .schurter .com info@schurterinc.com 2 appliance connectors accessories 122,1 96,2 24,0 24,0 24,0 12,0 11,0 42,0 32,5 kits e & g kit h inlet end of cut-out oulet end of cut-out oulet end of cut-out kits e & g 24,0 24,0 24,0 36,0 42,0 16,1 12,4 inlet end of cut-out 12,0 ?3,4 additional drilling for kit a additional drilling for kits e & g when used with 472x or 6600 snap-in additional drilling for kits e, g & h when used with 4754 only plug or connector for cable appliance inlet or outlet kea snap-in 4700.0001 0888.0005 * kea / kfa screw-on 4700.0002 0888.0004 * keb i snap-in 4700.0001 0888.0005 * keb i / kfb i screw-on 4700.0002 0888.0004 * keb ii / kfb ii 4700.0001 0888.0005 * kec / kfc 4700.0001 0888.0005 * kd / cd 4700.0001 0888.0005 * ke / ce 4700.0001 0888.0005 * kg / cg 4700.0001 0888.0005 * kfs / kfx 4700.0003 0888.0001 * felcom 54/64 4700.0001 0888.0005 * 5100 screw-on 4700.0003 0888.0001 * 5110 screw-on 4700.0003 0888.0001 * 5200 screw-on 4700.0002 0888.0004 * 5220 screw-on 4700.0002 0888.0004 * 6100 screw-on 4700.0003 0888.0001 * 6100 snap-in 4700.0001 0888.0005 * 6110 screw-on 4700.0003 0888.0015 6110 snap-in 4700.0001 0888.0016 6200 screw-on 4700.0002 0888.0004 * 6200 snap-in 4700.0001 0888.0005 * 6220 screw-on 4700.0002 0888.0004 * 6220 snap-on 4700.0001 0888.0005 * 6600 screw-on 4700.0004 4700.0006 0888.0017 4707 4700.0002 ** 4721 screw-on 4700.0004 4700.0006 4723 snap-in 4700.0005 4700.0007 4752 4700.0005 4700.0007 4754 4700.0008 4700.0005 4700.0007 ** 4797 4700.0009 4798 4700.0010 6600 snap-in 4700.0005 4700.0007 * 4781.0000 4781.0100 4782.0000 4782.0100 4732.0000 (4300.0407) 1) 4735.0000 4300.0602 1) 4300.0603 1) 4795.0000 4796.0000 cord retaining kits: conversion chart schurter inc. to schurter ltd. * no existing retaining kit 1) part no from schurter inc. additional drilling for kits e, g when used with 4752
|
